HP 4400 HP B-series Fabric OS 7.0.0a Release Notes (5697-0881, June 2011) - Page 49

Multi-protocol Router causes VE_Ports on DCX to become G_Ports if

Get HP 4400 PDF manuals and user guides View all HP 4400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Closed fixes summary Solution A newly replaced device on an FL_Port does not register with name server properly, and the initiator is unable to discover the device. Fixed in Fabric OS 7.0.0. When writes to compact flash timeout, software reset recovery results in access to a bad pointer triggering a kernel switch panic and results Fixed in Fabric OS 7.0.0. in a switch reboot. AN-1010 messages are logged on R_RDY ports when interoperating with M-Series switches. Workaround prior to upgrade:Use the "portcfgislmode slot/port 1" in setting the E_Port in McDATA rdy mode, so that bottleneck detection will not monitor it for traffic congestion. Fixed in Fabric OS 7.0.0. RX_Count is misleading/invalid on the HP 2408 FCoE switch when port 0 is included. Fixed in Fabric OS 7.0.0. Licesnes may be added erroneously after a configdownload. Fixed in Fabric OS 7.0.0. CP HA Failover occurs after software verify errors. Error messages such as the following are output : 2010/11/28-09:42:02, [RAS-1004], 80, SLOT 6 | FFDC | FID 128, WARNING, STXW002, Software 'verify' error detected. Workaround prior to upgrade:Ignore the error message if seen in conjunction with HA Failover. Fixed in Fabric OS 7.0.0. The following error is seen when trying to copy to "running-config" on an HP 2408 FCoE Switch:% Warning: This rule id is used for another Fixed in Fabric OS 7.0.0. classifier. A Switch with default SSH keys are not carried forward with a firmware upgrade. Workaround prior to upgrade:Manually delete the interfering key on the host side and login again. Fixed in Fabric OS 7.0.0. Disabling a range of online VEX ports on an HP StorageWorks 400 Multi-protocol Router causes VE_Ports on DCX to become G_Ports if the disabling occurs prior to the VE_Ports coming online. Fixed in Fabric OS 7.0.0. The time displayed is not in synch with timezone / time chanes when timezone has been set or if time was changed with date command during firmwarecommit. Fixed in Fabric OS 7.0.0. The command portbeacon --enable ports on the HP StorageWorks SAN Director 6-port 10Gb FC Blade does not cause the port LEDs to beacon. However, no error or warning msg is displayed when the command portbeacon --enable is issued. Fixed in Fabric OS 7.0.0. In a FICON environment, FE & FF ports are disabled without any warning message even when there is an FMS mode enable failure in the HP StorageWorks DC04 SAN Director Switch. Fixed in Fabric OS 7.0.0. Users are unable to configure Fabric Watch VE_Ports event notifications by using Web Tools because the VE_Port class tab is not displayed in Fixed in Fabric OS 7.0.0. Web Tools (Fabric Watch) but is displayed via CLI. HP B-series Fabric OS 7.0.0a Release Notes 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
Solution
Closed fixes summary
Fixed in Fabric OS 7.0.0.
A newly replaced device on an FL_Port does not register with name
server properly, and the initiator is unable to discover the device.
Fixed in Fabric OS 7.0.0.
When writes to compact flash timeout, software reset recovery results
in access to a bad pointer triggering a kernel switch panic and results
in a switch reboot.
Workaround prior to upgrade:
Use the
"portcfgislmode slot/port 1" in setting
the E_Port in McDATA rdy mode, so
that bottleneck detection will not
monitor it for traffic congestion.
Fixed in Fabric OS 7.0.0.
AN-1010 messages are logged on R_RDY ports when interoperating
with M-Series switches.
Fixed in Fabric OS 7.0.0.
RX_Count is misleading/invalid on the HP 2408 FCoE switch when
port 0 is included.
Fixed in Fabric OS 7.0.0.
Licesnes may be added erroneously after a configdownload.
Workaround prior to upgrade:
Ignore
the error message if seen in
conjunction with HA Failover.
Fixed in Fabric OS 7.0.0.
CP HA Failover occurs after software verify errors. Error messages
such as the following are output : 2010/11/28-09:42:02, [RAS-1004],
80, SLOT 6 | FFDC | FID 128, WARNING, STXW002, Software
'verify' error detected.
Fixed in Fabric OS 7.0.0.
The following error is seen when trying to copy to "running-config" on
an HP 2408 FCoE Switch:% Warning: This rule id is used for another
classifier.
Workaround prior to
upgrade:
Manually delete the
interfering key on the host side and
login again.
Fixed in Fabric OS 7.0.0.
A Switch with default SSH keys are not carried forward with a firmware
upgrade.
Fixed in Fabric OS 7.0.0.
Disabling a range of online VEX ports on an HP StorageWorks 400
Multi-protocol Router causes VE_Ports on DCX to become G_Ports if
the disabling occurs prior to the VE_Ports coming online.
Fixed in Fabric OS 7.0.0.
The time displayed is not in synch with timezone / time chanes when
timezone has been set or if time was changed with date command
during firmwarecommit.
Fixed in Fabric OS 7.0.0.
The command portbeacon --enable ports on the HP StorageWorks
SAN Director 6-port 10Gb FC Blade does not cause the port LEDs to
beacon. However, no error or warning msg is displayed when the
command portbeacon --enable is issued.
Fixed in Fabric OS 7.0.0.
In a FICON environment, FE & FF ports are disabled without any
warning message even when there is an FMS mode enable failure in
the HP StorageWorks DC04 SAN Director Switch.
Fixed in Fabric OS 7.0.0.
Users are unable to configure Fabric Watch VE_Ports event notifications
by using Web Tools because the VE_Port class tab is not displayed in
Web Tools (Fabric Watch) but is displayed via CLI.
HP B-series Fabric OS 7.0.0a Release Notes
49