HP 5100 HP LaserJet 5100 Series - Printer Maintenance Kit - Page 9
Reinstalling self-tapping screws, Required Tools, CAUTION,
UPC - 808736092500
View all HP 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English CAUTION Reinstalling self-tapping screws To reinstall a self-tapping screw, complete the following steps: 1 Turn the screw to the left until it clicks, indicating the threads are seated. 2 Turn the screw to the right to tighten. Do not over-tighten the screws. If a self-tapping screw-hole becomes stripped, repair of the screw-hole or replacement of the affected assembly is required. Required Tools Phillips #2 screwdriver (6-inch shaft) with a magnetic tip Small, flat-blade screwdriver All screws used in field-replaceable printer components are Phillips head screws that require a #2 size Phillips screwdriver. Figure 1 below shows the difference between a Phillips and a Posidriv screwdriver. Note that the Phillips tip has more beveled surfaces. Figure 1 Phillips Posidriv Differences between Phillips and Posidriv screwdrivers ENWW Reinstalling self-tapping screws 7