HP 540 HP 540 Notebook PC and HP 541 Notebook PC - Maintenance and Service Gui - Page 71
TouchPad board and TouchPad button board, Display assembly see
View all HP 540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
TouchPad board and TouchPad button board NOTE: The top cover, spare part number 500002-001, includes the TouchPad board and cable, and the TouchPad button board and cable. Before removing the TouchPad board and TouchPad button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Switch cover and keyboard on page 47) d. Switch cover (see Switch cover and keyboard on page 47) e. Speaker (see Speaker on page 51) f. Display lid switch module (see Display lid switch module on page 52) g. Display assembly (see Display assembly on page 53) h. Top cover (see Top cover on page 58) Remove the TouchPad board and TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Release the ZIF connectors on the TouchPad button board (1) and TouchPad board (2) to which the TouchPad board cable is connected. 3. Disconnect and remove the TouchPad board cable (3). Component replacement procedures 61