HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1055

Chapter 22 Show Commands show cfs Send documentation comments to [email protected] 20:00:00:05:30:00:cb:56 172.22.46.224 20:00:00:05:30:00:5b:5e 172.22.46.182 20:00:00:05:30:00:34:9e 172.22.46.220 Total number of entries = 7 The following example shows how to display CFS information for all applications on the switch. switch# show cfs application Application Enabled Scope ntp No Physical-all fscm Yes Physical-fc role No Physical-all rscn No Logical radius No Physical-all fctimer No Physical-fc syslogd No Physical-all callhome No Physical-all fcdomain Yes Logical device-alias Yes Physical-fc Total number of entries = 10 Note The show cfs application command displays only those applications that are registered with CFS. Conditional services that use CFS do not appear in the output unless those services are running. The following example shows how to display CFS information for the device alias application. switch# show cfs application name device-alias Enabled Timeout Merge Capable Scope : Yes : 5s : Yes : Physical The following example shows how to display CFS merge operation information for the device alias application. switch# show cfs merge status device-alias Physical Merge Status: Success Local Fabric Switch WWN IP Address 20:00:00:05:30:00:34:9e 172.22.46.220 [Merge Master] 20:00:00:05:30:00:5b:5e 172.22.46.182 20:00:00:05:30:00:61:de 172.22.46.223 20:00:00:05:30:00:cb:56 172.22.46.224 20:00:00:05:30:00:eb:46 172.22.46.222 20:00:00:05:30:00:f1:e2 172.22.46.225 The following example shows whether or not CFS distribution is enabled. switch# show cfs status Fabric distribution Enabled switch# OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 22-23