HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1067

Chapter 22 Show Commands show cloud membership Send documentation comments to [email protected] show cloud membership To display membership information about the cloud, use the show cloud membership command. show cloud membership [all | interface {gigabitethernet slot/port | port-channel number} | unresolved] Syntax Description all Displays all clouds and cloud members. interface Displays all members of a cloud containing a specified interface. gigabitethernet slot/port Specifies a Gigabit Ethernet interface by slot and port number. The range is 1 to 6. port-channel number Specifies a PortChannel interface. The range is 1 to 128. unresolved Displays unresolved members of the cloud. Defaults None. Command Modes EXEC mode. Command History Release 3.0(1) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the members of clouds. switch# show cloud membershp Undiscovered Cloud port-channel 1[20:00:00:05:30:00:a7:9e] IP Addr fe80::205:30ff:fe00:a412 port-channel 1.250[20:00:00:05:30:00:a7:9e] IP Addr 3000:2::1 port-channel 1.250[20:00:00:05:30:00:a7:9e] IP Addr fe80::205:30ff:fe00:a412 #members=3 Cloud 2 port-channel 1[20:00:00:05:30:00:a7:9e] IP Addr 3000:1::1 #members=1 Cloud 3 GigabitEthernet1/1[20:00:00:05:30:00:a7:9e] IP Addr 10.10.10.1 #members=1 Cloud 4 GigabitEthernet1/2[20:00:00:05:30:00:a7:9e] IP Addr 10.10.60.1 #members=1 OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 22-35