HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1482

tlport alpa-cache Chapter 23 T Commands Send documentation comments to [email protected] tlport alpa-cache To manually configure entries in an ALPA cache, use the tlport alpa-cache command tlport alpa-cache interface interface pwwn pwwn alpa alpa no tlport alpa-cache interface interface pwwn pwwn Syntax Description interface interface pwwn pwwn alpa alpa Specifies a Fibre Channel interface. Specifies the peer WWN ID for the ALPA cache entry. Specifies the ALPA cache to which this entry is to be added. Defaults Disabled. Command Modes Configuration mode. Command History Release 1.3(5) Modification This command was introduced. Usage Guidelines Generally, ALPA cache entries are automatically populated when an ALPA is assigned to a device. Use this command only if you wish to manually add further entries. Examples The following example configures the specified pWWN as a new entry in this cache switch# config terminal switch(config)# tlport alpa-cache interface fc1/2 pwwn 22:00:00:20:37:46:09:bd alpa 0x02 Related Commands Command show tlport Description Displays TL port information. 23-50 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x