HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1080

show crypto map domain ipsec Chapter 22 Show Commands Send documentation comments to [email protected] show crypto map domain ipsec To map configuration information for IPsec, use the show crypto map domain ipsec command. show crypto map domain ipsec [interface gigabitethernet slot/port | tag tag-name] Syntax Description interface gigabitethernet slot/port tag tag-name Displays IPsec map information for a specific Gigabit Ethernet interface. Displays IPsec map information for a specific tag name. The maximum length is 63 characters. Defaults Displays all IPsec map information. Command Modes EXEC mode. Command History Release 2.0(x) Modification This command was introduced. Usage Guidelines To use this command, IPsec must be enabled using the crypto ipsec enable command. Examples The following example shows how to display IPsec crypto map information. switch# show crypto map domain ipsec Crypto Map "cm10" 1 ipsec Peer = 10.10.10.4 IP ACL = aclmds10 permit ip 10.10.10.1 255.255.255.255 10.10.10.4 255.255.255.255 Transform-sets: 3des-md5, 3des-sha, des-md5, des-sha, Security Association Lifetime: 450 gigabytes/3600 seconds PFS (Y/N): N Crypto Map "cm10" 2 ipsec Peer = Auto Peer IP ACL = acl10 permit ip 10.10.10.0 255.255.255.0 10.10.10.0 255.255.255.0 Transform-sets: 3des-md5, 3des-sha, des-md5, des-sha, Security Association Lifetime: 450 gigabytes/3600 seconds PFS (Y/N): N Crypto Map "cm11" 1 ipsec Peer = 10.10.11.2 IP ACL = aclany permit ip any any Transform-sets: 3des-md5, 3des-sha, des-md5, des-sha, Security Association Lifetime: 450 gigabytes/3600 seconds PFS (Y/N): N Crypto Map "cm50" 1 ipsec Peer = 10.10.50.2 IP ACL = aclany 22-48 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x