HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 427

Chapter 6 Debug Commands debug module Send documentation comments to [email protected] debug module To enable debugging for switching or service modules, use the debug module command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug module {all | error [module slot] | event | ha | no-powerdown | trace [module slot]} no debug module {all | error [module slot] | event | ha | no-powerdown | trace [module slot]} Syntax Description all error event ha no-powerdown trace module slot Enables debugging for all module features. Enables debugging for module error conditions. Enables debugging for module events. Enables debugging for a module's high availability features. Disables the power cycle feature for the module. Enables debugging for a module's trace flows. Restricts debugging to the specified module. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug module all command is issued: switch# debug module all 2005 Mar 10 02:51:01 module: fu_fsm_execute_all: match_msg_id(0), log_already_open(0) 2005 Mar 10 02:51:01 module: fu_fsm_execute_all: null fsm_event_list 2005 Mar 10 02:51:01 module: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 6986564) dropped Related Commands Command no debug all show module Description Disables all debugging. Displays the status of a module. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 6-81