HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 626

interface mgmt Chapter 11 I Commands Send documentation comments to [email protected] interface mgmt To configure a management interface, use the interface mgmt command in configuration mode. interface mgmt number Syntax Description number Specifies the management interface number which is 0. Defaults Disabled. Command Modes Configuration mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines When you try to shutdown a management interface(mgmt0), a follow-up message confirms your action before performing the operation. Use the force option to bypass this confirmation, if required. Examples The following example configures the management interface, displays the options available for the configured interface, and exits to configuration mode. switch# config terminal switch(config)# switch(config)# interface mgmt 0 switch(config-if)# exit switch(config)# The following example shuts down the interface without using the force option: switch# config terminal switch(config)# interface mgmt 0 switch(config-if)# shutdown Shutting down this interface will drop all telnet sessions. Do you wish to continue (y/n)? y The following example shuts down the interface using the force option: switch# config terminal switch(config)# interface mgmt 0 switch(config-if)# shutdown force switch(config-if)# Related Commands Command Description show interface mgmt Displays interface configuration for specified interface. 11-34 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x