HP Cisco MDS 9124 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1479

Chapter 23 T Commands time Send documentation comments to [email protected] time To configure the time for the command schedule, use the time command. To disable this feature, use the no form of the command. time {daily daily-schedule | monthly monthly-schedule | start {start-time | now} | weekly weekly-schedule} no time Syntax Description daily daily-schedule monthly monthly-schedule start start-time now weekly weekly-schedule Configures a daily command schedule. The format is HH:MM, where HH is hours (0 to 23) and MM is minutes (0 to 59). Maximum length is 5 characters. Configures a monthly command schedule. The format is dm:HH:MM, where dow is the day of the month (1 to 31), HH is hours (0 to 23) and MM is minutes (0 to 59). Maximum length is 8 characters. Schedules a job to run at a future time. Specifies the future time to run the job. The format is yyyy:mmm:dd:HH:MM, where yyyy is the year, mmm is the month (jan to dec), dd is the day of the month (1 to 31), HH is hours (0 to 23) and MM is minutes (0 to 59). Maximum length is 18 characters. Starts the job two minutes after the command is entered. Configures a weekly command schedule. The format is dow:HH:MM, where dow is the day of the week (1 to 7, Sun to Sat), HH is hours (0 to 23) and MM is minutes (0 to 59). Maximum length is 10 characters. Defaults Disabled. Command Modes Scheduler job configuration submode. Command History Release 2.0(x) Modification This command was introduced. Usage Guidelines To use this command, the command scheduler must be enabled using the scheduler enable command. Examples The following example shows how to configure a command schedule job to run every Friday at 2200. switch# config terminal switch(config)# scheduler schedule name MySchedule switch(config-schedule)# time weekly 6:22:00 The following example starts a command schedule job in two minutes and repeats every 24 hours. switch(config-schedule)# time start now repeat 24:00 OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 23-47