HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 115
show module
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Chapter 1 Basic System Commands show module Send comments to [email protected] show module To display module information, use the show module command. show module [module-number | fex [chassis_ID | all]] Syntax Description module-number fex chassis_ID all (Optional) Number of the module. The valid range is from 1 to 3. (Optional) Displays information about the attached Fabric Extender units. (Optional) Specifies a Fabric Extender chassis ID. Chassis ID is 100 to 199. (Optional) Displays information about all the attached Fabric Extender units. Command Default Displays module information for all modules in the switch chassis. Command Modes EXEC mode Command History Release 4.0(0)N1(1a) 4.0(1a)N2(1) Modification This command was introduced. This command was modified to provide Fabric Extender support. Examples This example shows how to display information for all modules in the chassis: switch# show module This example shows how to display information for a specific module: switch# show module 2 This example shows how to display information about an attached Fabric Extender: switch# show module fex 101 This example shows how to display information about all attached Fabric Extender units: switch# show module fex all Related Commands Command show hardware internal show inventory Description Displays information about the physical hardware. Displays hardware inventory information. OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-93