HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 39

Chapter 1 Basic System Commands clock timezone Send comments to [email protected] clock timezone To configure the time zone offset from Coordinated Universal Time (UTC), use the clock timezone command. To revert to the default, use the no form of this command. clock timezone zone-name offset-hours offset-minutes no clock timezone Syntax Description zone-name offset-hours offset-minutes Zone name. The name is a 3-character string for the time zone acronym (for example, PST or EST). Number of hours offset from UTC. The range is from -23 to 23. Number of minutes offset from UTC. The range is from 0 to 59. Command Default None Command Modes Interface configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines Use the command to offset the device clock from UTC. Examples This example shows how to configure the time zone offset from UTC: switch(config)# clock timezone PST -8 0 This example shows how to revert the time zone offset to the default: switch# no clock timezone Related Commands Command show clock Description Displays the clock time. OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-17