HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 341
aaa authentication login error-enable
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Chapter 6 Security Commands aaa authentication login error-enable Send comments to [email protected] aaa authentication login error-enable To configure that the AAA authentication failure message displays on the console, use the aaa authentication login error-enable command. To revert to the default, use the no form of this command. aaa authentication login error-enable no aaa authentication login error-enable Syntax Description This command has no arguments or keywords. Command Default Disabled. Command Modes Configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When you log in, the login is processed by rolling over to the local user database if the remote AAA servers do not respond. In this situation, the following message is displayed if you have enabled the displaying of login failure messages: Remote AAA servers unreachable; local authentication done. Remote AAA servers unreachable; local authentication failed. Examples This example shows how to enable the display of AAA authentication failure messages to the console: switch(config)# aaa authentication login error-enable This example shows how to disable the display of AAA authentication failure messages to the console: switch(config)# no aaa authentication login error-enable Related Commands Command show aaa authentication Description Displays the status of the AAA authentication failure message display. OL-16599-01 Cisco Nexus 5000 Series Command Reference 6-7