HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 72
Command Default, Command Modes, Command History, Usage Guidelines, Examples, Keyword
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
install all Chapter 1 Basic System Commands Send comments to [email protected] Table 1-5 Keyword sftp: tftp: URL Prefix Keywords for Remote File Systems Source or Destination Source URL for an SSH FTP (SFTP) network server. The syntax is as follows: sftp:[//[username@]server][/path]/filename Source URL for a TFTP network server. The syntax is as follows: tftp:[//server[:port]][/path]/filename Command Default If you do not enter any parameters, the boot variable values are used. Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines If you do not enter the information about the server or username when downloading and installing the image files from a remote server, you are prompted for the information. This command sets the kickstart and system boot variables and copies the image files to the redundant supervisor module. The install all command upgrades the switch software and also upgrades the Fabric Extender software of all attached chassis. The Fabric Extender remains online passing traffic while the software is copied. Once the software images have successfully been installed, the parent switch and the Fabric Extender chassis are rebooted automatically. This is done to maintain the software version compatibility between parent switch and the Fabric Extender. You can use install all command to downgrade the Cisco NX-OS software on the switch. To determine if the downgrade software is compatible with the current configuration on the switch, use the show incompatibility system command and resolve any configuration incompatibilities. Examples This example shows how to install the Cisco NX-OS software from the bootflash: directory: switch# install all kickstart bootflash:nx-os_kick.bin system bootflash:nx-os_sys.bin This example shows how to install the Cisco NX-OS software using the values configured in the kickstart and system boot variables: switch# configure terminal switch(config)# boot kickstart bootflash:nx-os_kick.bin switch(config)# boot system bootflash:nx-os_sys.bin switch(config)# exit switch# copy running-config startup-config switch# install all 1-50 Cisco Nexus 5000 Series Command Reference OL-16599-01