HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 635
member (zone configuration mode
View all HP Cisco MDS 9222i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 635 highlights
Chapter 8 Fibre Channel Commands member (zone configuration mode) Send comments to [email protected] member (zone configuration mode) To add a member name to a Fibre Channel zone, use the member command. To remove a member name from a zone, use the no form of the command. member {device-alias aliasname | domain-id domain-id port-number port | fcalias alias-name | fcid fc-id | fwwn fwwn-id | interface fc slot/port [domain-id domain-id | swwn swwn-id] | pwwn pwwn-id [lun lun-id] | symbolic-nodename nodename} no member {device-alias aliasname | domain-id domain-id port-number port | fcid fc-id | fwwn fwwn-id | interface fc slot/port [domain-id domain-id | swwn swwn-id] | pwwn pwwn-id [lun lun-id] | symbolic-nodename nodename} Syntax Description device-alias aliasname lun lun-id domain-id domain-id alias-name port-number port fcid fc-id fwwn fwwn-id interface fc slot/port swwn swwn-id pwwn pwwn-id symbolic-nodename nodename Specifies the member device alias. Maximum length is 64 characters. Specifies the member LUN ID. The format is 0xhhhh[:hhhh[:hhhh[:hhhh]]], where h is a hexadecimal digit. Specifies the member domain ID. The range is 1 to 239. The name of the fcalias. Maximum length is 64 characters. Specifies the member port number. The range is 0 to 255. Specifies the member FC ID. The format is 0xhhhhhh, where h is a hexadecimal digit. Specifies the member fWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h is a hexadecimal digit. Specifies the member interface ID. Specifies the member sWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h is a hexadecimal digit. Specifies the member pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h is a hexadecimal digit. Specifies the member symbolic node name. The maximum length is 255 characters. Command Default None Command Modes Zone set zone configuration mode and zoneset-zone configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines Create a zone set zone member only if you need to add member to a zone from the zone set prompt. OL-16599-01 Cisco Nexus 5000 Series Command Reference 8-101