HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 80

modem set-string user-input Chapter 1 Basic System Commands Send comments to [email protected] modem set-string user-input To configure the user-input initialization string to download to a modem connected to the console port, use the modem set-string user-input command. To revert to the default, use the no form of this command. modem set-string user-input string no modem set-string Syntax Description string User-input string. This string is alphanumeric and case sensitive, can contain special characters, and has a maximum of 100 characters. Command Default None Command Modes Terminal line configuration Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You can configure the console port only from a session on the console port. Examples This example shows how to configure the user-input initialization string for the modem connected to the console port: switch# configure terminal switch(config)# line console switch(config-console)# modem init-string user-input ATE0Q1&D2&C1S0=3\015 This example shows how to revert to the default user-input initialization string for the modem connected to the console port: switch# configure terminal switch(config)# line console switch(config-console)# no modem set-string Related Commands Command line console modem init-string show line Description Enters console port configuration mode. Downloads the user-input initialization string to a modem. Displays information about the console port configuration. 1-58 Cisco Nexus 5000 Series Command Reference OL-16599-01