HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 373

Chapter 6 Security Commands interface policy deny Send comments to [email protected] interface policy deny To enter interface policy configuration mode for a user role, use the interface policy deny command. To revert to the default interface policy for a user role, use the no form of this command. interface policy deny no interface policy deny Syntax Description This command has no arguments or keywords. Command Default All interfaces Command Modes User role configuration Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples This example shows how to enter interface policy configuration mode for a user role: switch(config)# role name MyRole switch(config-role)# interface policy deny switch(config-role-interface)# This example shows how to revert to the default interface policy for a user role: switch(config)# role name MyRole switch(config-role)# no interface policy deny Related Commands Command role name show role Description Creates or specifies a user role and enters user role configuration mode. Displays user role information. OL-16599-01 Cisco Nexus 5000 Series Command Reference 6-39