HP Cisco MDS 9222i Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2 - Page 75

Chapter 1 Basic System Commands line console Send comments to [email protected] line console To specify the console port and enter console port configuration mode, use the line console command. line console Syntax Description This command has no arguments or keywords. Command Default None Command Modes Interface configuration mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines You can configure the console line only from a console port session. Examples This example shows how to enter console port configuration mode: switch# configure terminal switch(config)# line console switch(config-console)# Related Commands Command databits exec-timeout modem parity show line speed stopbits Description Configures the number of data bits in a character for a port. Configures the inactive terminal timeout for a port. Configures the modem settings for a port. Configures the parity settings for a port. Displays information about the console port configuration. Configures the transmit and receive speed for a port. Configures the stop bits for a port. OL-16599-01 Cisco Nexus 5000 Series Command Reference 1-53