HP Color LaserJet Professional CP5220 Service Manual - Page 225

System Setup menu Use this menu to establish basic product settings. The System Setup menu has several sub-menus. Each is described in the following table. Menu item Language Paper Setup Sub-menu item Default Paper Size Default Paper Type Tray 1 Tray 2 Tray 3 Paper Out Action Sub-menu item Letter A4 Legal A3 11x17 A list of available media types appears. Paper Size Paper Type Paper Size Paper Type Paper Size Paper Type Wait Forever Override Cancel Description Select the language for the control-panel display messages and the product reports. Select the size for printing internal reports or any print job that does not specify a size. Select the media type for printing internal reports or any print job that does not specify a type. Select the default size and type for Tray 1 from the list of available sizes and types. Select the default size and type for Tray 2 from the list of available sizes and types. If optional Tray 3 is installed, select the default size and type for Tray 3 from the list of available sizes and types. Select how the product should react when a print job requires a size or type that is not available or when a specified tray is empty. Select the Wait Forever option to make the product wait until you load the correct media, and then press the OK button. This is the default setting. Select the Override option to print on a different size or type after a specified delay. Select the Cancel option to automatically cancel the print job after a specified delay. If you select either the Override or Cancel option, the control panel prompts you to specify the number of seconds to delay. Use the arrow buttons to increase or decrease the time. ENWW Tools for troubleshooting 213