HP DL560 HP ProLiant DL560 Server Maintenance and Service Guide - Page 15
Removing the Server from the Rack
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
16 HP ProLiant DL560 Server Maintenance and Service Guide WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before extending a component from the rack. WARNING: To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding the server into the rack. The sliding rails could pinch your fingers. 3. After performing the installation or maintenance procedure, slide the server back into the rack: a. Press the server rail-release latches and slide the server fully into rack. b. Secure the server by tightening the thumbscrews. Removing the Server from the Rack To remove the server from a Compaq branded, Telco, or third-party rack: 1. Power down the server ("Powering Down the Server" on page 14). 2. Loosen the front panel thumbscrews that secure the server faceplate to the front of the rack.