HP DL560 HP ProLiant DL560 Server Maintenance and Service Guide - Page 26
Front Bezel, Extend or remove the server from the rack Extending the Server from
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Removal and Replacement Procedures 27 For information on fan redundancy, refer to "Redundant Hot-Plug Fan Option (on page 87)." 4. Remove the fan. CAUTION: Do not operate the server for long periods without the access panel. Operating the server without the access panel results in improper airflow and improper cooling that can lead to thermal damage. IMPORTANT: For optimum cooling, install fans in all primary fan locations. For more information, refer to the previous fan locations table. To replace the component, reverse the removal procedure. Front Bezel To remove the component: 1. Power down the server ("Powering Down the Server" on page 14). 2. Extend or remove the server from the rack ("Extending the Server from the Rack" on page 15, "Removing the Server from the Rack" on page 16). 3. Remove all hard drives ("Hot-Plug SCSI Hard Drive" on page 17). 4. Remove the six screws (three on each side) from the front bezel.