HP DL560 HP ProLiant DL560 Server Maintenance and Service Guide - Page 62

Option ROM Configuration for Arrays, Administer User Accounts, Con iLO Settings, Network

Get HP DL560 - ProLiant - 1 GB RAM PDF manuals and user guides
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

64 HP ProLiant DL560 Server Maintenance and Service Guide HP recommends using DNS/DHCP with iLO to simplify installation. If DNS/DHCP cannot be used, use the following procedure to disable DNS/DHCP and to configure the IP address and the subnet mask: 1. Restart or power up the server. 2. Press the F8 key when prompted during POST. The iLO RBSU runs. 3. Enter a valid iLO user ID and password with the appropriate iLO privileges (Administer User Accounts, Configure iLO Settings). Default account information is located on the iLO Default Network Settings tag. 4. Select Network, DNS/DHCP, press the Enter key, and then select DHCP Enable. Press the spacebar to turn off DHCP. Be sure that DHCP Enable is set to Off and save the changes. 5. Select Network, NIC and TCP/IP, press the Enter key, and type the appropriate information in the IP Address, Subnet Mask and Gateway IP Address fields. 6. Save the changes. The iLO system automatically resets to use the new setup when you exit iLO RBSU. Option ROM Configuration for Arrays Before installing an operating system, you can use the ORCA utility to create the first logical drive, assign RAID levels, and establish online spare configurations. The utility provides support for the following functions: • Configuring one or more logical drives using physical drives on one or more SCSI buses • Viewing the current logical drive configuration • Deleting a logical drive configuration If you do not use the utility, ORCA will default to the standard configuration. For more information about array controller configuration, refer to the Smart Array 5i Plus Controller and Battery-Backed Write Cache Enabler User Guide, or the HP ROM-Based Setup Utility User Guide on the Documentation CD.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
64
HP ProLiant DL560 Server Maintenance and Service Guide
HP recommends using DNS/DHCP with iLO to simplify installation. If
DNS/DHCP cannot be used, use the following procedure to disable DNS/DHCP
and to configure the IP address and the subnet mask:
1.
Restart or power up the server.
2. Press the
F8
key when prompted during POST. The iLO RBSU runs.
3.
Enter a valid iLO user ID and password with the appropriate iLO privileges
(
Administer User Accounts
,
Configure iLO Settings
). Default account
information is located on the iLO Default Network Settings tag.
4. Select
Network
,
DNS/DHCP
, press the
Enter
key, and then select
DHCP
Enable
. Press the spacebar to turn off DHCP. Be sure that
DHCP Enable
is
set to
Off
and save the changes.
5. Select
Network
,
NIC and TCP/IP
, press the
Enter
key, and type the
appropriate information in the
IP Address
,
Subnet Mask
and
Gateway IP
Address
fields.
6.
Save the changes. The iLO system automatically resets to use the new setup
when you exit iLO RBSU.
Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the
first logical drive, assign RAID levels, and establish online spare configurations.
The utility provides support for the following functions:
•
•
•
Configuring one or more logical drives using physical drives on one or more
SCSI buses
Viewing the current logical drive configuration
Deleting a logical drive configuration
If you do not use the utility, ORCA will default to the standard configuration.
For more information about array controller configuration, refer to the
Smart
Array 5i Plus Controller and Battery-Backed Write Cache Enabler User Guide
,
or the
HP ROM-Based Setup Utility User Guide
on the Documentation CD.