HP DL560 HP ProLiant DL560 Server Maintenance and Service Guide - Page 75
System Maintenance Switch, Position, Default, Function
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Server Component Identification 77 System Maintenance Switch Position Default Function S1 Off Reserved S2 Off Off = System configuration can be changed. On = System configuration is locked. S3 Off Reserved S4 Off Off = Booting from diskette is controlled by RBSU. On = Booting from diskette is disabled. S5 Off Off = Power-on password is enabled. On = Power-on password is disabled. S6 Off Off = No function. On = Clear NVRAM*. S7 Off Off = iLO security is enabled. On = iLO security is disabled. S8 Off Off = Processor hot-spare boot is enabled. On = Processor hot-spare boot is disabled. NOTE: To access the redundant ROM using the system maintenance switch, refer to "Access to Redundant ROM Settings." * If you clear NVRAM, you must re-enter the server serial number through RBSU ("Re-Entering the Server Serial Number" on page 58).