HP DL560 HP ProLiant DL560 Server Maintenance and Service Guide - Page 57

Re-Entering the Server Serial Number, System Options, Serial Number, Enter, Escape

Get HP DL560 - ProLiant - 1 GB RAM PDF manuals and user guides
UPC - 808736876919
View all HP DL560 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

58 HP ProLiant DL560 Server Maintenance and Service Guide NOTE: When removing the system board, you may leave the DIMMs, the PPMs, the Smart Array 5i memory module, and the system battery on the system board, unless you are replacing them as failed items. 2. Remove the rear fan bracket. To replace the component, reverse the removal procedure. Re-Entering the Server Serial Number After you replace the system board or clear NVRAM, you must re-enter the server serial number. 1. During the server startup sequence, press the F9 key to access RBSU. 2. Select the System Options menu. 3. Select Serial Number. The following warning is displayed: WARNING! WARNING! WARNING! The serial number is loaded into the system during the manufacturing process and should NOT be modified. This option should only be used by qualified service personnel. This value should always match the serial number sticker located on the chassis. 4. Press the Enter key to clear the warning. 5. Enter the serial number and press the Enter key. 6. Press the Escape key to close the menu.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
58
HP ProLiant DL560 Server Maintenance and Service Guide
NOTE:
When removing the system board, you may leave the DIMMs,
the PPMs, the Smart Array 5i memory module, and the system battery
on the system board, unless you are replacing them as failed items.
2.
Remove the rear fan bracket.
To replace the component, reverse the removal procedure.
Re-Entering the Server Serial Number
After you replace the system board or clear NVRAM, you must re-enter the
server serial number.
1.
During the server startup sequence, press the
F9
key to access RBSU.
2. Select the
System Options
menu.
3. Select
Serial Number
. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded
into the system during the manufacturing process and
should NOT be modified. This option should only be used
by qualified service personnel. This value should always
match the serial number sticker located on the chassis.
4. Press the
Enter
key to clear the warning.
5.
Enter the serial number and press the
Enter
key.
6. Press the
Escape
key to close the menu.