HP Dc5700 Hardware Reference Guide - dc5700 MT - Page 22
Removing or Installing an Expansion Card - video card
UPC - 882780819535
View all HP Dc5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Removing or Installing an Expansion Card The computer has two standard PCI expansion slots that can accommodate an expansion card up to 17.46 cm (6.875 inches) in length. The computer also has one PCI Express x1 expansion slot and one ADD2/SDVO expansion slot. Figure 2-7 Expansion Slot Locations Item 1 2 3 4 Description PCI expansion slot PCI expansion slot PCI Express x1 expansion slot ADD2/SDVO expansion slot NOTE The dc5700 platform only supports the use of normal (or non-reversed) layout ADD2 (Advanced Digital Display 2) adapter cards inserted into the SDVO (Serial Digital Video Output) connector on the platform's system board. ADD2 cards are used to give multi-monitor capabilities to the integrated graphics controller. The ADD2/SDVO connector on the system board has the physical appearance of a PCI Express x16 connector; however, the platform does NOT support the use of conventional PCI Express cards or reversed-layout ADD2 cards. To remove, replace, or add an expansion card: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as diskettes or compact discs, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. 16 Chapter 2 Hardware Upgrades ENWW