HP Dc5700 Hardware Reference Guide - dc5700 MT - Page 23
CAUTION, Releasing the Slot Cover Lock - expansion slots
UPC - 882780819535
View all HP Dc5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
CAUTION Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 7. On the rear of the computer, a sliding slot cover lock secures the expansion card brackets and expansion slot covers in place. Loosen the captive thumbscrew that holds the slot cover lock in place (1) and slide the slot cover lock up and off the chassis (2). Figure 2-8 Releasing the Slot Cover Lock 8. Before installing an expansion card, remove the expansion slot cover or the existing expansion card. ENWW Removing or Installing an Expansion Card 17