HP Dc7800 Hardware Reference Guide - HP Compaq dc7800 Convertible Minitower - Page 10

Rear Panel Components, Product Features - drivers

Page 10 highlights

Rear Panel Components Figure 1-4 Rear Panel Components Table 1-3 Rear Panel Components 1 Power Cord Connector 6 Line-In Audio Connector (blue) 2 RJ-45 Network Connector 3 Parallel Connector 4 Serial Connector 5 PS/2 Mouse Connector (green) 7 Line-Out Connector for powered audio devices (green) 8 Universal Serial Bus (USB) 9 VGA Monitor Connector 10 PS/2 Keyboard Connector (purple) NOTE: Arrangement and number of connectors may vary by model. The Line-in audio connector can be retasked as a microphone connector in the audio driver's control panel. The monitor connector on the system board is inactive when a PCI Express x16 graphics card is installed in the computer. If a PCI or PCI Express x1 graphics card is installed, the connectors on the card and the system board may be used at the same time. Some settings may need to be changed in Computer Setup to use both connectors. For information about Boot Order, refer to the Computer Setup (F10) Utility Guide. 4 Chapter 1 Product Features ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

Rear Panel Components
Figure 1-4
Rear Panel Components
Table 1-3
Rear Panel Components
1
Power Cord Connector
6
Line-In Audio Connector (blue)
2
RJ-45 Network Connector
7
Line-Out Connector for powered audio
devices (green)
3
Parallel Connector
8
Universal Serial Bus (USB)
4
Serial Connector
9
VGA Monitor Connector
5
PS/2 Mouse Connector (green)
10
PS/2 Keyboard Connector (purple)
NOTE:
Arrangement and number of connectors may vary by model.
The Line-in audio connector can be retasked as a microphone connector in the audio driver's control panel.
The monitor connector on the system board is inactive when a PCI Express x16 graphics card is installed in the
computer.
If a PCI or PCI Express x1 graphics card is installed, the connectors on the card and the system board may be used
at the same time. Some settings may need to be changed in Computer Setup to use both connectors. For information
about Boot Order, refer to the
Computer Setup (F10) Utility Guide
.
4
Chapter 1
Product Features
ENWW