HP Dc7800 Hardware Reference Guide - HP Compaq dc7800 Convertible Minitower - Page 19
Removing the Front Bezel
UPC - 883585764365
View all HP Dc7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Removing the Front Bezel 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as diskettes or compact discs, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Remove the computer access panel. 6. Push up on the two release tabs (1), then rotate the front bezel away from the chassis to release it (2). Figure 2-4 Removing the Front Bezel ENWW Removing the Front Bezel 13