HP Deskjet 935c (English) Macintosh Connect * Users Guide - C6427-90071 - Page 10

OUT Tray, Printer Maintenance Tips

Get HP Deskjet 935c PDF manuals and user guides View all HP Deskjet 935c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

1 Printing Basics OUT Tray The printer sends finished pages to the OUT tray. OUT Tray Flap Down - This is the typical position for most types of printing. The down position also allows single envelope printing and printing on media smaller than 100 x 148 mm or 4 x 5 5/8 inches. For information about printing on other media, see Chapter 2. Out Tray Flap Up - The OUT Tray Flap must be in the up position to properly load banner paper. The OUT Tray Flap must remain in the up position to print banners,. Single envelope and small media slot Paper width guide OUT Tray Flap down OUT Tray Flap up Printer Maintenance Tips Because the printer ejects ink onto the paper in a fine mist, ink smudges will eventually appear on the printer case. To remove smudges, stains, and/or dried ink from the exterior of the printer, use a soft cloth moistened with water. When cleaning your printer, keep these tips in mind: • Do not clean the interior of the printer. Keep all fluids away from the interior. • Do not use household cleaners or detergent. In the event that a household cleaner or detergent is used on the printer, wipe the printer's exterior surfaces with a soft cloth moistened with water. • Do not lubricate the print cartridge support rod. Noise is normal when the print cartridge cradles slide back and forth. For information on cleaning print cartridges and the print cartridge cradle, see page 32. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
Printing Basics
1
3
OUT Tray
The printer sends finished pages to the OUT tray.
OUT Tray Flap Down – This is the typical position for most types of printing. The
down position also allows single envelope printing and printing on media smaller
than 100 x 148 mm or 4 x 5 5/8 inches. For information about printing on other
media, see Chapter 2.
Out Tray Flap Up – The OUT Tray Flap must be in the up position to properly load
banner paper. The OUT Tray Flap must remain in the up position to print banners,.
Printer Maintenance Tips
Because the printer ejects ink onto the paper in a fine mist, ink smudges will
eventually appear on the printer case. To remove smudges, stains, and/or dried
ink from the exterior of the printer, use a soft cloth moistened with water.
When cleaning your printer, keep these tips in mind:
•
Do not
clean the interior of the printer. Keep all fluids away from the interior.
•
Do not
use household cleaners or detergent. In the event that a household
cleaner or detergent is used on the printer, wipe the printer’s exterior surfaces
with a soft cloth moistened with water.
•
Do not
lubricate the print cartridge support rod. Noise is normal when the print
cartridge cradles slide back and forth.
For information on cleaning print cartridges and the print cartridge cradle,
see page 32.
Single envelope and
small media slot
OUT Tray Flap down
OUT Tray Flap up
Paper width guide