HP Dv4 1540us Service Guide - Page 105

Fingerprint reader board

Page 105 highlights

Fingerprint reader board Description Fingerprint reader Spare part number 486828-001 Before removing the fingerprint reader, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 55). 5. Remove the following components: a. Hard drive (see Hard drive on page 59) b. WLAN cover (see WLAN module on page 62) c. Optical drive (see Optical drive on page 57) d. Keyboard (see Keyboard on page 72) e. Keyboard cover (see Keyboard cover on page 74) f. Display assembly (see Display assembly on page 80) g. Top cover (see Top cover on page 92) Remove the TouchPad: 1. Turn the top cover upside down, with the front toward you. 2. Fold back the Mylar cover (1). 3. Remove the two Phillips PM2.0×3.0 screws that secure the fingerprint reader to the top cover (2). Component replacement procedures 97

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

Fingerprint reader board
Description
Spare part number
Fingerprint reader
486828-001
Before removing the fingerprint reader, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
55
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
59
)
b.
WLAN cover (see
WLAN module
on page
62
)
c.
Optical drive (see
Optical drive
on page
57
)
d.
Keyboard (see
Keyboard
on page
72
)
e.
Keyboard cover (see
Keyboard cover
on page
74
)
f.
Display assembly (see
Display assembly
on page
80
)
g.
Top cover (see
Top cover
on page
92
)
Remove the TouchPad:
1.
Turn the top cover upside down, with the front toward you.
2.
Fold back the Mylar cover
(1)
.
3.
Remove the two Phillips PM2.0×3.0 screws that secure the fingerprint reader to the top cover
(2)
.
Component replacement procedures
97