HP ENVY dv6-7213nr HP ENVY dv6 Notebook PC Maintenance and Service Guide IMPOR - Page 99

Subwoofer, Remove the USB board

Get HP ENVY dv6-7213nr PDF manuals and user guides View all HP ENVY dv6-7213nr manuals
Add to My Manuals
Save this manual to your list of manuals

Page 99 highlights

Remove the USB board: 1. Disconnect the USB board cable (1) from the system board. 2. Remove the Phillips PM2.5×5.5 screw (2) that secures the USB board to the base enclosure. 3. Remove the USB board (3). Reverse this procedure to install the USB board. Subwoofer Description Subwoofer (includes subwoofer cable, top speakers passthrough cable, and 2 rubber isolators) Spare part number 682097-001 Before removing the subwoofer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 51), and then remove the following components: a. Hard drive (see Hard drive on page 52) b. Optical drive (see Optical drive on page 59) c. Keyboard (see Keyboard on page 61) Component replacement procedures 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
Remove the USB board:
1.
Disconnect the USB board cable
(1)
from the system board.
2.
Remove the Phillips PM2.5×5.5 screw
(2)
that secures the USB board to the base enclosure.
3.
Remove the USB board
(3)
.
Reverse this procedure to install the USB board.
Subwoofer
Description
Spare part number
Subwoofer (includes subwoofer cable, top speakers passthrough cable, and 2 rubber isolators)
682097-001
Before removing the subwoofer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
51
), and then remove the following components:
a.
Hard drive (see
Hard drive
on page
52
)
b.
Optical drive (see
Optical drive
on page
59
)
c.
Keyboard (see
Keyboard
on page
61
)
Component replacement procedures
91