HP Elite Folio 13.5 Maintenance and Service Guide - Page 41
Speakers, You must pull the WWAN antenna cables and tape up and left before you can remove the left
View all HP Elite Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
To insert the battery, reverse the removal procedures. Speakers To remove the speakers, use this procedure and illustration. Table 6-2 Speakers description and part number Description Speakers Spare part number M35259-001 Before removing the speakers, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 28). 2. Remove the pen (see Pen on page 28). 3. Remove the bottom cover (see Bottom cover on page 30). 4. Remove the battery (see Battery on page 31). Remove the speakers: 1. Disconnect the right speaker cable from the system board (1). NOTE: If tape is holding the cables in place, gently pull up and reuse the tape when reassembling the speakers. 2. Remove the antenna cable from its routing path near the right speaker (2). NOTE: You must pull the WWAN antenna cables and tape up and left before you can remove the left speaker cable. 3. Disconnect the left speaker cable from the system board (3). 4. Remove the right speaker cable from the channel below the system board (4). 5. Remove the two Phillips M1.4 × 1.2 screw (5) from each speaker. Component replacement procedures 33