HP Elite Folio 13.5 Maintenance and Service Guide - Page 65
Solid-state drive specifications
View all HP Elite Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table 10-2 Display specifications (continued) Resolution Surface treatment Brightness Viewing angle Backlight Metric U.S. 1920 × 1280 (WUXGA+) BrightView 400 nits (BrightView panels) 1000 nits (Antiglare panels) UWVA WLED Solid-state drive specifications This section provides specifications for your solid-state drives. Table 10-3 Solid-state drive specifications 128 GB* 256 GB* 512 GB* Dimensions Height 1.0 mm 1.0 mm 1.0 mm Length 50.8 mm 50.8 mm 50.8 mm Width 28.9 mm 28.9 mm 28.9 mm Weight < 10 g < 10 g < 10 g Interface type PCIe PCIe PCIe Ready time, maximum (to not busy) 1.0 ms 1.0 ms < 1.0 ms Access times, logical 1.0 ms 0.1 ms 0.1 ms Transfer rate Sequential read up to 2150 MB/s up to 2150 MB/s up to 2150 MB/s Random read Up to 300,000 IOPs Up to 300,000 IOPs Up to 300,000 IOPs Sequential write up to 1550 MB/s up to 1550 MB/s up to 1550 MB/s Random write Up to 100,000 IOPs Up to 100,000 IOPs Up to 100,000 IOPs Total logical sectors 234,441,648 468,883,296 1,000,215,216 Operating temperature 0°C to 70°C (32°F to 158°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications can differ slightly. NOTE: Certain restrictions and exclusions apply. Contact support for details. Solid-state drive specifications 57