HP Elite Folio 13.5 Maintenance and Service Guide - Page 59

Use tweezers to release the board from the inside-top of the display rear cover

Get HP Elite Folio 13.5 PDF manuals and user guides View all HP Elite Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

a. Disconnect the cable from the camera module (1). b. Use a tool to release the module from the inside-top of the display rear cover (2). The module is secured with adhesive. The camera module is available as spare part number M35270-001. 5. To remove the ambient light sensor board from the display rear cover: a. Disconnect the cable from the ZIF connector on the transfer board (1). b. Use tweezers to release the board from the inside-top of the display rear cover (2). The board is secured with adhesive. The ambient light sensor is available in the Display Cable Kit as spare part number M35258-001. Reverse this procedure to reassemble and install the display assembly. Component replacement procedures 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
a.
Disconnect the cable from the camera module
(1)
.
b.
Use a tool to release the module from the inside-top of the display rear cover
(2)
. The module is
secured with adhesive.
The camera module is available as spare part number M35270-001.
5.
To remove the ambient light sensor board from the display rear cover:
a.
Disconnect the cable from the ZIF connector on the transfer board
(1)
.
b.
Use tweezers to release the board from the inside-top of the display rear cover
(2)
. The board is
secured with adhesive.
The ambient light sensor is available in the Display Cable Kit as spare part number M35258-001.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures
51