HP Elite Folio 13.5 Maintenance and Service Guide - Page 56
Be sure to lift the lever on the connector, Disconnect the display cable from the transfer board
View all HP Elite Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
f. Lift the panel off and place next to computer (4). TIP: If the tape breaks before you can completely remove it from behind the display panel, be sure to continue panel removal by using suction cups to remove the panel from the display rear cover. g. Disconnect the display cable from the transfer board (1). Be sure to lift the lever on the connector before disconnecting the cable. h. Disconnect the two cables from the ZIF connectors on the touch board (2). 48 Chapter 6 Removal and replacement procedures for authorized service provider parts
f.
Lift the panel off and place next to computer
(4)
.
TIP:
If the tape breaks before you can completely remove it from behind the display panel, be
sure to continue panel removal by using suction cups to remove the panel from the display rear
cover.
g.
Disconnect the display cable from the transfer board
(1)
. Be sure to lift the lever on the connector
before disconnecting the cable.
h.
Disconnect the two cables from the ZIF connectors on the touch board
(2)
.
48
Chapter 6
Removal and replacement procedures for authorized service provider parts