HP EliteBook 700 Maintenance and Service Guide - Page 43
Removal and replacement procedures for Customer Self-Repair parts, Component replacement procedures
View all HP EliteBook 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5 Removal and replacement procedures for Customer Self-Repair parts This chapter provides removal and replacement procedures for Customer Self-Repair parts. NOTE: The Customer Self-Repair program is not available in all locations. Installing a part not supported by the Customer Self-Repair program may void your warranty. Check your warranty to determine if Customer Self-Repair is supported in your location. Component replacement procedures NOTE: Details about the computer, including model, serial number, product key, and length of warranty, are on the service tag on the bottom of the computer. See Service label on page 16 for details. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. There are as many as 20 screws that must be removed, replaced, and/or loosened when servicing Customer Self-Repair parts. Make special note of each screw size and location during removal and replacement. Bottom cover Description Bottom cover Spare part number 821662-001 Before removing the bottom cover, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unscrewing the power cord from the AC outlet, and then unscrewing the AC adapter from the computer. 3. Disconnect all external devices from the computer. Remove the bottom cover: 1. Turn the computer upside down on a flat surface. 2. Remove the 11 rubber screw covers (1). Component replacement procedures 33