HP EliteBook 700 Maintenance and Service Guide - Page 47

Hard drive, Loosen the 4 captive screws

Get HP EliteBook 700 PDF manuals and user guides View all HP EliteBook 700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Hard drive Description 1-TB, 5400-rpm, 7.0-mm 500-GB, 7200-rpm, 7.0-mm 500-GB, 7200-rpm, 7.0-mm, FIPS 500-GB, 7200-rpm, 7.0-mm, SED Spare part number 762990-001 703267-001 820572-001 820573-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unscrewing the power cord from the AC outlet, and then unscrewing the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Remove the battery (see Battery on page 36). To remove the hard drive: 1. Loosen the 4 captive screws (1) that secure the hard drive to the computer. 2. Slide the hard drive (2) to the right to disconnect it from the connector. 3. Remove the hard drive (3). Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
Hard drive
Description
Spare part number
1-TB, 5400-rpm, 7.0-mm
762990-001
500-GB, 7200-rpm, 7.0-mm
703267-001
500-GB, 7200-rpm, 7.0-mm, FIPS
820572-001
500-GB, 7200-rpm, 7.0-mm, SED
820573-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unscrewing the power cord from the AC outlet, and
then unscrewing the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
33
).
5.
Remove the battery (see
Battery
on page
36
).
To remove the hard drive:
1.
Loosen the 4 captive screws
(1)
that secure the hard drive to the computer.
2.
Slide the hard drive
(2)
to the right to disconnect it from the connector.
3.
Remove the hard drive
(3)
.
Component replacement procedures
37