HP EliteBook 700 Maintenance and Service Guide - Page 65
Fingerprint reader assembly, that secures the bracket to the top cover.
View all HP EliteBook 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Fingerprint reader assembly Description Fingerprint reader assembly (includes cable, bracket, and bezel) Spare part number 821693-001 Before removing the fingerprint reader assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unscrewing the power cord from the AC outlet, and then unscrewing the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Remove the battery (see Battery on page 36). 6. Remove the system board (see System board on page 49). Remove the fingerprint reader assembly: 1. Remove the Phillips PM2.5x3.0 screw (1) that secures the bracket to the top cover. 2. Slide the bracket right, and then lift it off the top cover (2). 3. Disconnect the fingerprint reader board cable from the system board. 4. Remove the fingerprint reader board and cable assembly from the top cover (3). Reverse this procedure to install the fingerprint reader assembly. Component replacement procedures 55