HP EliteBook 700 Maintenance and Service Guide - Page 67
NFC module, Remove the NFC module
View all HP EliteBook 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
NFC module Description NFC module Spare part number 821666-001 Before removing the NFC module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unscrewing the power cord from the AC outlet, and then unscrewing the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 33). 5. Remove the battery (see Battery on page 36). 6. Remove the system board (see System board on page 49). Remove the NFC module: 1. Disconnect the system board cable (1) and the NFC antenna from the NFC module. 2. Pry the NFC module from the smart card reader, and the lift it from the computer (2). NOTE: The NFC antenna is spared with the TouchPad. Reverse the removal procedures to install the NFC module. Component replacement procedures 57