HP Folio 13 User Manual - Page 35
key to release, Lift the right side of the top cover, and then press upwards behind - keyboard
View all HP Folio 13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
For use in country or region: For use in Saudi Arabia For use in The Netherlands For use in Denmark, Finland, Norway Spare part number: 673656-171 673656-B31 673656-DH1 For use in country or region: For use in Russia For use in Switzerland For use in Spain Spare part number: 673656-251 673656-BG1 673656-071 Before removing the keyboard, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 25). Remove the keyboard: 1. Turn the computer right-side up with the front facing you. 2. Partially open the computer. 3. At the right side of the computer, insert a screwdriver or similar thin tool into the top cover release area, pressing upwards until the top cover starts to disengage from the computer. 4. Lift the right side of the top cover, and then press upwards behind the Backspace key to release the keyboard from the top cover. 5. Lift the rear edge of the keyboard, gently swing the keyboard forward slightly, and disconnect the keyboard's zero insertion force (ZIF) cable (1). 6. Disconnect the keyboard light cable (2) . Component replacement procedures 27