HP Folio 13 User Manual - Page 47

RTC battery, Remove the RTC battery

Get HP Folio 13 PDF manuals and user guides View all HP Folio 13 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

RTC battery Description RTC battery Spare part number 672349-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 25). 5. Remove the keyboard (see Keyboard on page 26). 6. Remove the top cover (see Top cover on page 28). 7. Disconnect the battery cable (see Battery on page 32). Remove the RTC battery: 1. Disconnect the RTC battery cable from the system board (1). 2. Remove the RTC battery (2). Use a thin, non-conductive tool to remove the RTC battery from the socket on the system board. (The RTC battery is also attached to the system board with double-sided tape.) Reverse this procedure to install the RTC battery on computer models. When installing the RTC battery, make sure the "+" sign faces up. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
RTC battery
Description
Spare part number
RTC battery
672349-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure screws (see
Base enclosure
on page
25
).
5.
Remove the keyboard (see
Keyboard
on page
26
).
6.
Remove the top cover (see
Top cover
on page
28
).
7.
Disconnect the battery cable (see
Battery
on page
32
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable from the system board
(1)
.
2.
Remove the RTC battery
(2)
. Use a thin, non-conductive tool to remove the RTC battery from
the socket on the system board. (The RTC battery is also attached to the system board with
double-sided tape.)
Reverse this procedure to install the RTC battery on computer models. When installing the RTC
battery, make sure the “+” sign faces up.
Component replacement procedures
39