HP Folio 13 User Manual - Page 48

Hard drive, Remove the 2 Phillips PM 2.0×2.5 screws

Get HP Folio 13 PDF manuals and user guides View all HP Folio 13 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Hard drive Description 128-GB mSATA solid-state drive (SSD) Spare part number 672616-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 25). 5. Remove the keyboard (see Keyboard on page 26). 6. Remove the top cover (see Top cover on page 28). 7. Disconnect the battery cable (see Battery on page 32). Remove the hard drive: 1. Remove the 2 Phillips PM 2.0×2.5 screws (1) that secure the hard drive to the computer. (The hard drive tilts up.) 2. Pull the hard drive to the right(2). 3. Remove the hard drive (3). Reverse this procedure to reassemble and install the hard drive. 40 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Hard drive
Description
Spare part number
128-GB mSATA solid-state drive (SSD)
672616-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure screws (see
Base enclosure
on page
25
).
5.
Remove the keyboard (see
Keyboard
on page
26
).
6.
Remove the top cover (see
Top cover
on page
28
).
7.
Disconnect the battery cable (see
Battery
on page
32
).
Remove the hard drive:
1.
Remove the 2 Phillips PM 2.0×2.5 screws
(1)
that secure the hard drive to the computer. (The
hard drive tilts up.)
2.
Pull the hard drive to the right
(2)
.
3.
Remove the hard drive
(3)
.
Reverse this procedure to reassemble and install the hard drive.
40
Chapter 4
Removal and replacement procedures