HP Folio 13 User Manual - Page 49
Memory module, on each side of the memory module slot to release
View all HP Folio 13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Memory module Description 4-GB memory module (PC3, 10600, 1333-MHz) Spare part number 641369-001 Before removing a memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 25). 5. Remove the keyboard (see Keyboard on page 26). 6. Remove the top cover (see Top cover on page 28). 7. Disconnect the battery cable (see Battery on page 32). Remove the memory module: 1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) CAUTION: To prevent damage to the memory module, hold it by the edges only. Do not touch the components on the memory module. 2. Slide the memory module forward (2). 3. Remove the memory module (3). Reverse this procedure to install a memory module. Component replacement procedures 41