HP Folio 13 User Manual - Page 45

USB/Audio board, Remove the keyboard see - memory

Get HP Folio 13 PDF manuals and user guides View all HP Folio 13 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

4. Remove the WLAN module by pulling the module away from the slot at an angle (4). NOTE: WLAN modules are designed with a notch (5) to prevent incorrect insertion into the memory module slot. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors. USB/Audio board Description USB/Audio board Spare part number 672358-001 Before removing the USB/Audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 25). 5. Remove the keyboard (see Keyboard on page 26). 6. Remove the top cover (see Top cover on page 28). 7. Disconnect the battery cable (see Battery on page 32). Remove the USB/Audio board: 1. Disconnect the USB/Audio board cable from the system board (1) 2. Disconnect the Phillips PM 2.0x2.0 screw securing the USB/Audio board (2). Component replacement procedures 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
4.
Remove the WLAN module by pulling the module away from the slot at an angle
(4)
.
NOTE:
WLAN modules are designed with a notch
(5)
to prevent incorrect insertion into the
memory module slot.
NOTE:
If the WLAN antennas are not connected to the terminals on the WLAN module, the
protective sleeves must be installed on the antenna connectors.
USB/Audio board
Description
Spare part number
USB/Audio board
672358–001
Before removing the USB/Audio board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure screws (see
Base enclosure
on page
25
).
5.
Remove the keyboard (see
Keyboard
on page
26
).
6.
Remove the top cover (see
Top cover
on page
28
).
7.
Disconnect the battery cable (see
Battery
on page
32
).
Remove the USB/Audio board:
1.
Disconnect the USB/Audio board cable from the system board
(1)
2.
Disconnect the Phillips PM 2.0x2.0 screw securing the USB/Audio board
(2)
.
Component replacement procedures
37