HP Folio 13 User Manual - Page 38
Turn the top cover upside down, with the back edge toward you.
View all HP Folio 13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Before removing the Power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 25). 5. Remove the keyboard (see Keyboard on page 26). 6. Remove the top cover (see Top cover on page 28). 7. Disconnect the battery cable (see Battery on page 32). Remove the Power button board and cable: 1. Turn the top cover upside down, with the back edge toward you. 2. Remove the 2 Phillips PM 2.0x3x0 screws securing the Power button board to the top cover (1). 3. Remove the Power button board (2). NOTE: The Power button board's cable is attached to the board. 30 Chapter 4 Removal and replacement procedures