HP Folio 13 User Manual - Page 42
Display panel, Turn the computer right-side up, with the front toward you.
View all HP Folio 13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Display panel Description 13.3-in, LED, BrightView SVA display panel Spare part number 672350-001 Before removing the display panel, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure screws (see Base enclosure on page 25). 5. Remove the keyboard (see Keyboard on page 26). 6. Remove the top cover (see Top cover on page 28). 7. Disconnect the battery cable (see Battery on page 32). Remove the display panel: 1. Turn the computer right-side up, with the front toward you. 2. Open the computer. 3. Disconnect the display panel cable from the system board (1). 4. Disconnect the USB/Audio board cable from the system board (2). 5. Disconnect the #1 and #2 WLAN antenna cables from the WLAN module (3). NOTE: The #1 WLAN antenna cable is connected to the WLAN module #1 terminal. The #2 WLAN antenna cable is connected to the WLAN module #2 terminal. For more information, see WLAN module on page 36, 34 Chapter 4 Removal and replacement procedures