HP Jetdirect 610n HP Jetdirect 610n EIO Print Server - (English) Hardware Inst
HP Jetdirect 610n Manual
View all HP Jetdirect 610n manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Jetdirect 610n manual content summary:
- HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 1
hp jetdirect 615n/610n/600n Print Server hardware installation guide - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 2
- HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 3
Hardware Installation Guide This guide is provided in a PDF format that is compatible with screen readers used for accessibility. HP Jetdirect 615N/610N/600N Print Server - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 4
product and replacement parts can be obtained from your HP Sales and Service Office or Authorized dealer. Safety Considerations Prior to the installation and use of this product, review all safety markings and instructions. Instruction Manual ! Symbol. If the product is marked with this symbol - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 5
Table of Contents 1. Introduction Supported Network Protocols 1-8 Supported Printers 1-9 Related Documentation 1-9 2. Installing the Print Server What You Need for Installation 2-11 Step 1. Identify Your HP Jetdirect 615N/610N/600N Internal Print Server 2-12 Step 2. (J4167A Only) If Necessary, - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 6
Network Protocols . . . A-27 To Restore Factory Default Values A-28 HP Jetdirect EIO Menu A-29 Classic Control Panel A-30 Graphical Control Panel A-32 Configuring IPX Frame Types A-34 Configuring IPX Source Routing (Token Ring Cards Only A-34 Configuring TCP/IP Parameters A-34 Configuring - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 7
/600N print server is illustrated below. The card must first be installed into the printer and connected to the network. Then, you must configure the card for network operation. HP Jetdirect 615N/610N/600N q To configure the card, you can use the HP Jetdirect printer installation and setup software - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 8
Supported Network Protocols Supported Network Protocols Network Printing Environments* HP Jetdirect Product TCP/IP Microsoft Windows 95/98/Me/NT4.0/2000/XP Novell NetWare 5 via NDPS UNIX and Linux, including: Hewlett-Packard HP-UX, Sun Microsystems Solaris (Sun SPARCsystems only), IBM AIX**, HP - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 9
, you can use the printer's control panel to configure basic network parameters on the HP Jetdirect 615N/610N/600N internal print server. Refer to Appendix A. Note For installation procedures or limitations in peripheral devices not covered in this guide, refer to the manuals supplied with the - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 10
1-10 Introduction ENWW - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 11
Print Server What You Need for Installation q The proper HP Jetdirect print server, documentation, and software for your network. q The proper network cables and connectors for connecting the card and printer to your network. q A static-safe environment for handling the card. CAUTION HP Jetdirect - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 12
Step 1. Identify Your HP Jetdirect 615N/610N/600N Internal Print Server Remove the HP Jetdirect card from its packaging and verify that you have the correct card for your network. HP J3110A (600N) for Ethernet and IEEE 802.3 Type 10Base-T networks (10 Mbps). This card provides a single RJ-45 - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 13
-45 or DB 9. HP J6057A (615N) or J4169A (610N) for Ethernet, IEEE 802.3 Type 10Base-T or IEEE 802.3u Type 100Base-TX networks. The card autonegotiates operation at 10 or 100 Mbps, fullor half-duplex mode, but can be manually set through the printers control panel. This card provides a single RJ-45 - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 14
HP J4167A 610N Token Ring print server, you must set the Data Rate switches on the card to either 4 Mbps or 16 Mbps. The selection depends on the data rate of your Token Ring network. 4 Mbps 16 Mbps a. Locate the Token Ring card Data Rate switches. b. Set the switches to 4 or 16 Mbps. The default - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 15
Configuration page. See your printer documentation for specific instructions. Note The name of the Printer Configuration page may also vary by printer. For example, HP DesignJet printers provide a "Service Configuration print" that displays status information. ENWW Installing the Print Server - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 16
, remove it. 4. Insert the card. Align the card with the guide rails in the slot. 5. Press the card into the slot until firmly seated and tighten each retaining screw a little at a time until both screws are secure. 6. Connect the network cable to the card. 2-16 Installing the Print Server ENWW - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 17
the HP J3111A 600N Ethernet card, you can connect to the LocalTalk port and to only one of the Ethernet ports (RJ-45 or BNC). For the HP J4167A 610N Token Ring card, you can connect to only one of the Token Ring ports (RJ-45 or DB 9). 7. Turn on the printer. ENWW Installing the Print Server 2-17 - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 18
that Jetdirect Configuration Page information also prints. In HP LaserJet printers, a Jetdirect Configuration Page will print for each EIO slot that contains an HP Jetdirect card. In HP DesignJet printers, Jetdirect configuration information will be included on the Service Configuration print. 2. In - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 19
Figure 2-2 Example of HP Jetdirect Configuration Page (600N) I/O CARD READY (615N/610N) I/O CARD READY 3. If I/O CARD READY appears, the card has been installed successfully. Proceed to "Step 6. Configure the Card with Network Parameters Required for Your Network." 4. If I/O CARD READY does not - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 20
Note For HP J6057A 615N or J4169A 610N 10/100Base-TX cards: See Chapter 3 in this guide for link configuration and troubleshooting information. For HP J3111A (600N) LocalTalk-Only Customers: If you are not connected to an Ethernet network, "I/O CARD NOT READY" and "LAN ERROR - EXTERNAL LOOPBACK" - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 21
Jetdirect CD-ROM. q Use HP printer management software (such as HP Web JetAdmin) or other network utilities to configure network parameters. HP printer management software can be downloaded from HP's Customer Care Online at: http://www.hp.com/support/net_printing ENWW Installing the Print Server - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 22
you use to configure the HP Jetdirect card for network operation, you may still need to set up your computer system for printing. To add the printer and enable printing on your system, do one of the following: q Use the HP Jetdirect printer installation software supplied on the HP Jetdirect CD-ROM - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 23
TX Link Configuration Introduction HP J6057A (615N) or J4169A (610N) 10/100Base-TX print servers support 10 or 100 Mbps operation using full-duplex or half-duplex transmission channels. By default, the print server will attempt to autonegotiate its link operation. When connecting to network hubs and - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 24
LEDs Link Troubleshooting If the HP J6057A/J4169A print server does not successfully connect to the network: q both link speed LEDs (10 and 100) will be off q a "LOSS OF CARRIER ERROR" will be indicated on the Jetdirect Configuration Page. Note The HP J6057A/J4169A 10/100Base-TX print server may - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 25
the following troubleshooting procedures: q Verify cabling connections. q Configure the print server's 10/100TX link setting directly (for example, using the EIO menu on the printer's control panel). Verify that the configuration of the connecting network device (such as a network switch) matches - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 26
3-26 10/100Base-TX Link Configuration ENWW - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 27
to configure. Enabling or Disabling Network Protocols When you first install the Jetdirect print server from the factory, all supported network protocols are enabled (or turned on) whenever you turn the printer on. If a network protocol is enabled, the card may actively transmit on the network even - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 28
and Jetdirect print server to their factory default values. (For Jetdirect factory default values, see the applicable HP Jetdirect Administrator's Guide supplied electronically on the HP Jetdirect CD-ROM.) To verify HP Jetdirect default values have been reset, print a Jetdirect configuration page - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 29
) q Configure 10/100Base-TX link operation (610N/615N only) The keystrokes to access the Jetdirect EIO menu from the printer control panel depends on the printer. Refer to the printer manuals for instructions to navigate the printer control panel. The HP Jetdirect internal print servers support the - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 30
enable or disable network protocols, and configure selected network parameters. On the control panel display, an asterisk (*) is used to identify the selected value. Table A.1 HP Jetdirect EIO Classic Control Panel Menu (1 of 2) Menu Item CFG NETWORK=NO* IPX/SPX=ON* DLC/LLC=ON* TCP/IP=ON* ATALK=ON - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 31
. Selects whether you want to manually configure the HP Jetdirect 10/100Base-TX print server's network link speed and communication mode. The Jetdirect settings must match the network. NO* (default): Bypass the link configuration menu items. YES*: Access the link configuration menu items. One of the - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 32
A.2 HP Jetdirect EIO Graphical Control Panel Menu (1 of 2) Menu Item TCP/IP Options Description of settings ENABLE ON: Enable the TCP/IP protocol OFF: Disable the TCP/IP protocol CONFIG METHOD Specifies the method that TCP/IP parameters will be configured on the Jetdirect print server. BOOTP - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 33
link speed and communication mode for the 10/100TX print server. For proper communications, the Jetdirect settings must match the network. AUTO: (Default) The print server will automatically configure itself to match the network's link speed and communication mode. 10T HALF: 10Mbps, half-duplex - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 34
IP address to operate on a TCP/IP network. If not configured, a default value 192.0.0.192 will be automatically assigned two minutes after the card is turned on. BOOTP (Bootstrap Protocol) or DHCP (Dynamic Host Configuration Protocol) operation depends on the print server model: q 615N/610N: You - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 35
(600N Ethernet Cards Only) Note For HP J6057A 615N or J4169A 610N print servers, the AppleTalk phase parameter is set to phase 2 and is not configurable. You can configure Apple EtherTalk parameters if the Apple EtherTalk protocol is enabled, and the PostScript printer language is enabled - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 36
A-36 ENWW - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 37
B Specifications and Regulatory Statements Specifications HP Jetdirect 615N/610N/600N Internal Print Server q HP J3110A (600N) q HP J3111A (600N) q HP J4167A (610N) q HP J4169A (610N) q HP J6057A (615N) Ethernet, IEEE 802.3 Type 10Base-T (RJ-45) Ethernet, IEEE 802.3 Type 10Base-T (RJ-45), Type - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 38
on page B-39.) HP Jetdirect J4167A Token Ring Print Server: a DB-9 connector Hewlett-Packard Company may cause interference and void the FCC authorization to operate this equipment. The Federal Communications Commission has prepared a booklet titled Interference Handbook (1986), which may be helpful - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 39
radio/TV technician for help. European Community When used with Ethernet, IEEE 802.3/802.3u 10/100Base-TX, or Token Ring configurations, this equipment complies Guide 22 and EN45014. They identify the products, the manufacturer's name and address, and the applicable specifications that are recognized - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 40
HP Jetdirect 600N/610N/615N Print Servers B-40 ENWW - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 41
Australia This equipment complies with Australian EMC requirements. Canada This equipment complies with Canadian EMC Class-A requirements. VCCI Class A (Japan) RRL Statement (Korea) Taiwan Class A. ENWW B-41 - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 42
Chinese Safety Statement B-42 ENWW - HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 43
- HP Jetdirect 610n | HP Jetdirect 610n EIO Print Server - (English) Hardware Inst - Page 44
Copyright © 2001 Hewlett-Packard Company English 5971-3231
hp
jetdirect
615n/610n/600n
Print Server
hardware
installation
guide