HP Mini CQ10-100 Compaq Mini CQ10 Notebook PC and Compaq Mini 102 Notebook PC - Page 46
Memory module, cover to the computer.
View all HP Mini CQ10-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Memory module Description 1024-MB memory module (PC2-6400, DDR2, 533-MHz) Spare part number 598861-001 Before removing the memory module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 36). 5. If your computer has WWAN capability, remove the SIM (see SIM on page 37). Remove the memory module: 1. Loosen the 2 Phillips PM2.0×3.0 captive screws (1) that secure the memory module compartment cover to the computer. 2. Swing the cover up and away from the inside of the computer (2), and then remove the cover (3). 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.) 38 Chapter 4 Removal and replacement procedures