HP Model 735 hp 12x speed CD-ROM disk drive user's guide (a1658-90703) - Page 17
Set the SCSI Address
View all HP Model 735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Introduction Set the SCSI Address The CD-ROM drive must have a unique SCSI target address. The CD-ROM drive'sjumpers are set at the factory to the SCSI default address of 2, as shown in Figure 1-3. You must also ensure that the operating mode jumpers are set for correct drive operation. We ship the drive with the operating mode jumpers set to operate correctly with your system. We recommend that you keep the default address if possible. CAUTION: SCSI disk drives are susceptible to mechanical and electrostatic shock. When handling the disk drives, always wear the staticgrounding wrist strap that came in the CD-ROM drive kit. Always handle the CD-ROM drive carefully. Electrostatic charges can damage CD-ROM drives. To prevent such damage from occurring, observe the following precautions during unpacking and installation: • Stand on a static-free mat. • Wear a static strap to ensure that any accumulated electrostatic charge discharges from your body to ground. • Connect all equipment together, including the static-free mat, static strap, routing nodes, and peripheral units. • Keep uninstalled CD-ROM drives in their protective antistatic bags. 1-7