HP N9120 HP Scanjet N9120 User Guide - Page 40
Wrong profile is used when the Scan button is pressed, Automatic document feeder problems - review
UPC - 883585711567
View all HP N9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 4 Wrong profile is used when the Scan button is pressed If you are using the HP Smart Document Scan Software, use the HP Scanner Tools Utility to determine which HP Smart Document Scan Software profile is assigned to the Scan button. If necessary, reset the profile assigned to the button. NOTE: You can also assign an HP Smart Document Scan Software profile to the Copy button. If you are using other scanning software, see the online help for that program. See also "Associate a quick start button with scanning software" on page 11 Automatic document feeder problems Use this section to help resolve issues that might occur when scanning from the automatic document feeder (ADF). Paper jams usually result from inappropriate paper being fed into the ADF. Review the tips for using the ADF. If misfeeds occur frequently, perform ADF maintenance. This section contains the following topics: • Clear a jam from the automatic document feeder • Automatic document feeder does not feed paper • The bottom of the scanned image is cut off See also • "Use the automatic document feeder" on page 5 • "Disable Misfeed (Multipick) Detection" on page 16 • "Care and maintenance" on page 22 38 Troubleshooting